Girraween Concrete Driveways

The entry to a rural block often sits next to a roadside drain, so it collects runoff from the road as well as the vehicles turning in and out. If the culvert is too small, blocked or poorly set, water can overtop the entry and scour the gravel. A concrete apron with a properly built culvert crossing usually solves the problem. Changes to crossovers on council roads generally need Litchfield Council approval, so we recommend checking first.

We would not pour on ground that is saturated or soft, as it can lead to settlement and cracking later. Where the ground is poor, the soft material may need to be removed and replaced with compacted fill, or the work may need to wait for drier weather. On some sites an engineer's input on the base or footings is worthwhile. We check the ground during the site visit and explain what preparation is needed.

Animal areas usually need a textured finish that gives hooves and paws better grip, with falls so the floor can be hosed and drained easily. Very smooth or polished finishes can be slippery when wet. Some owners add rubber mats in stalls over the concrete. We can discuss what animals will use the space and finish the slab accordingly.

Yes. Many rural owners start with the entry apron and the parking area near the house, then extend the driveway over the following dry seasons. We plan the layout and levels at the start so later stages join neatly with proper joints and consistent falls, and we keep a note of the details so the next stage matches as closely as practical.